NEK606 Offshore & Marine Cable

Cable Characteristics

Mud Resistant

The suitability of sheathing materials for use in areas in which the cables are exposed to drilling fluids is heavily dependent upon the type of fluid present. Each type of fluid contains additives which can have a deleterious effect on the sheathing material.
According to NEK 606, the mud resistant cables shall have a SHF Mud sheath that comply with the requirements in IEC 60092-359 for SHF2 and the below specified. The mud resistant cables shall be designed with sheathing compounds suitable for installation and operation in contact with MUD unless otherwise specified.

Oil Resistance

All thermoset sheathed cables shall be suitable for an oil production installation. The oil resistance properties shall be demonstrated by a test according to IEC 60092-359 SHF2.

Flame Retardance

The cables shall withstand the test specified in IEC 60332-3-10, -22, -23, -24, -25. Single, earth and bonding wires shall withstand the test specified in IEC 60332-1 or IEC 60332-2.

Fire Resistance

Fire resistance cables shall be tested according to IEC 60331-11, -12, -21, -25 and -31.

RG11 Armoured Coaxial Cable

Applications

These 75Ω coaxial cables are suitable for installation on board of ships and other indoor marine environments.

Standards

IEC 60092-350	IEC 60332-3-22
IEC 60754-1,2	IEC 61034-1,2
NEK 606:2004

Construction

Conductors : 14AWG solid bare copper.
Insulation : Foam PE.
Shielding1 : Al/Polyester/Al tape.
Shielding2 : Tinned copper braid.
Bedding : Low smoke and halogen-free polyolefin, coloured black.
Armour : Tinned Copper wire braid.
Outer Sheath : Low smoke and halogen-free polyolefin.

Electrical Characteristics

AWG		14
Nominal Conductor Diameter	mm	1.6
Impedance	Ω	75+/-5
Nominal Attenuation@100MHz	dB/100m	4.5
Nominal Attenuation@270MHz	dB/100m	7.6
Nominal Attenuation@540MHz	dB/100m	10.8
Nominal Attenuation@750MHz	dB/100m	12.8
Nominal Attenuation@1000MHz	dB/100m	14.8
Capacitance	pF/m	53.5
Velocity of Propagation	%	83
Conductor DCR	Ω/km	8.5
Shield DCR	Ω/km	12.1
Inductance	μH/m	0.32
Time Delay	ns/m	4

Mechanical and Thermal Properties

Bending Radius : 15×OD.
Temperature Range : -30℃ ~ +75℃.

Dimensions and Weight

Nominal Inner Conductor Diameter mm	Nominal Insulation Thickness mm	Nominal Sheath Thickness mm	Nominal Overall Diameter mm	Nominal Weight kg/km
1.6	2.7	1.7	15.0	353